Quick Start Guide

A quick and easy to use guide for operating your device.

User Guide

A complete guide on how to use all of the features of your device.

  • Step 1 Download

    Download and install the Sena Device Manager on your computer.

  • Step 2 Update

    Update the firmware of your Sena product with the Sena Device Manager.

  • Step 3 Pair

    Reset your Sena product to the factory default setting (refer to the User’s Guide) and pair your Sena product with your Bluetooth device again.

  • Firmware History

    The supported firmware version of each product differs by manufactured date.
    Check if your device has the latest version with Sena Device Manager or Sena Apps.

    FIRMWARE RELEASE NOTES

    v 1.0.6
    June 5, 2024

    • Reduced the time it takes to hear the beeping sound after hearing the “phone pairing” voice prompt
    • Added a beep sound when pressing the Center Button to enter Mobile Phone Pairing mode
    • Added a beep sound when entering Mobile Phone Pairing mode while voice prompts are disabled
    • Prevented the headset from scanning for other devices when Mesh Reach-Out is not being used
    • Added a battery indicator when powering on and off the device
    • Added support for updating the firmware on the device over-the-air (OTA)
    • Officially changed the name from Expand Mesh to EXPAND Mesh
    • Minor bug fix with phone calls not working properly when making a phone call while using Mesh Intercom
    • Minor bug fix with stopping the ringtone for an incoming phone call while using Mesh Intercom
    • Minor bug fix with indicating the battery level after powering on the headset before automatically entering Mobile Phone Pairing mode
    • Minor bug fix with not hearing the ringtone when receiving a phone call while using Mesh Intercom
    • Minor bug fix with music not automatically resuming after hearing directions from a GPS app
    • Minor bug fix with not hearing the beeping sound when the voice prompt “Press any button to cancel” is heard while the heads was in Mobile Phone pairing mode
    • Minor bug fix with low-temperature charging settings not being applied after updating the firmware wirelessly
    • Minor bug fix with removing a popping sound when Mesh Intercom is turned on and off repeatedly
    • Minor bug fix with preventing the headset from powering off automatically
    • Minor bug fix with not being able to cancel Mobile Phone Pairing after powering on the headset
    • Minor bug fix with the voice prompts in Finnish


    v 1.0.4
    June 19, 2023

    • Added “Mesh Reach-Out” feature
    • Reduced the volume of the beep when adjusting the volume to maximum
    • Reduced all initial volume settings
    • Minor bug fix with sound not decreasing when controlling the volume during a phone call using the iPhone buttons
    • Minor bug fix with the volume not being initialized after performing a Factory Reset


    v 1.0.2
    June 2, 2023

    • Added a beep when ending a phone call
    • Enabled the ringtone to be heard when receiving a phone call during Mesh Intercom
    • Changed the button notification beeps to match existing Sena products
    • Improved the playback speed of the volume limit notification beeps
    • Minor bug fix for an issue where the phone button notification tone would not play during a phone call
    • Minor bug fix for the Configuration Menu not exiting properly
    • Minor bug fix for the headset not entering “Phone Pairing” mode when using the Configuration Menu, Speed Dial or Factory Reset
    • Minor bug fix for volume decreasing when receiving a phone call on an iPhone
    • Minor bug fix where the beeps would not play when quickly adjusting the volume

     

  • Sena Outdoor App

    The Sena Outdoor App provides users with even more ways to customize their Sena devices. Available for iPhones and Androids, Smart Intercom Pairing enables instant connections via a simple scan of QR codes. Users can also manage the paired list of devices and access device settings.